Skip to content
Free Inspection Documented findings with photos, in writing, before storm season rather than after. Documented findings, in writing. Book yours →
FAMILY-OWNED IN DFW · 5-YEAR WRITTEN WORKMANSHIP WARRANTY, TRANSFERABLE5-YEAR WRITTEN WARRANTY
[ R-PANEL / PBR METAL ROOFING · ALLEN ]DFW METROPLEX · TX

Allen, TX

R-Panel / PBR Metal Roofing in Allen

Recommended by DFW homeownersRead their words →
Service infoDFW · est. 2023
  • (469) 405-7870
  • Serving the entire DFW metroplex. We come to you
  • Mon–Sat · 7:30 AM – 6:30 PM
  • 5-Year Written Workmanship Warranty, transferable
  • Family-owned & operated · residential + commercial
Direct answer

R-panel, the PBR profile, is the Texas workhorse: the exposed-fastener metal system on barns, shops, and a growing number of Allen homes that want metal durability at a working price.

R-panel’s ribbed profile spans well, sheds water fast, installs efficiently, and costs meaningfully less than standing seam. The design trade is the same as every exposed-fastener system: screws through the panel face need periodic checks. For budget-conscious metal conversions in Allen, R-panel is frequently the right answer, and we say so even when fancier systems would quote higher.

You receive a free written estimate after an inspection documented with photos. We never waive a deductible, since Texas law prohibits it, and we are not a public adjuster.

Choosing R-panel for an Allen conversion

A conversion usually starts with an original shingle roof. In Allen, the median home was built in 2003 and 27 percent went up in 2010 or later, so plenty of owners are facing a first full replacement and weighing metal for the first time. R-panel keeps that switch within a practical budget.

Hail frequency is the other half of the case. Stones at least an inch across fell within 6 miles of Allen in 13 of the last 20 years, and the March 24, 2019 storm produced hail up to 4.5 inches. Ribbed steel takes cosmetic dents and keeps the water out, a trade most metal owners accept happily. Crews working Allen also cover Plano and Lucas elsewhere in Collin County.

THE SYSTEM

R-Panel / PBR Metal Roofing, up close.

A charcoal-gray standing seam metal roof on a single-story red-brick North Texas ranch home. True architectural standing seam — NOT corrugated or ribbed agricultural panel: wide, completely FLAT sixteen-inch pans between seams, with only one slim vertical seam rib every sixteen inches, so a whole roof plane shows maybe fifteen to twenty widely-spaced ribs total. Panels run unbroken from eave to ridge, no exposed fasteners anywhere in the field, a clean matching ridge cap along the peak, crisp drip edge at the eave, one plumbing vent with a color-matched boot. Morning light rakes across so each slim rib casts one long thin shadow across the flat pan beside it. Mature live oak partially shading one side, tidy lawn, clear sky.
Standing seam metal. Wide flat pans, concealed fasteners: the profile that shrugs off hail seasons.
PUBLIC RECORD

The local record behind R-Panel / PBR Metal Roofing in Allen

How a roof system holds up in Allen depends on the storms it has to take and the houses it sits on. Here is what the public record shows.

27
Hail days, 1 in.+ since 2006
12
Golf-ball-size hail days
4.5 in.
Largest stone on record
2003
Median year homes built

Hail near Allen

NOAA's Storm Events Database lists 27 days since 2006 with hail one inch or larger reported within 6 miles of Allen. On 12 of those days, the stones were golf ball size or bigger. Hail that size was reported in 13 of the last 20 years. The largest stones on record nearby measured 4.5 inches (softball size) on March 24, 2019. The most recent report: 1-inch hail on March 29, 2025.

How old Allen homes are

The median home in Allen was built in 2003. A large share of the city's 39,094 housing units are now old enough that original roofs are coming due, while 27% were built in 2010 or later.

Sources: NOAA National Centers for Environmental Information, Storm Events Database (hail reports since 2006 within 6 miles of Allen); U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates. Data pulled September 2026.

Common questions about r-panel / pbr metal roofing in Allen

What is the difference between R-panel and standing seam in Allen?

Price and fasteners. R-panel screws through the face and costs meaningfully less; standing seam conceals fasteners and costs more. Both are legitimate, so the choice is budget versus maintenance profile.

Is R-panel just for barns?

No. Barndominiums, shops, and plenty of Allen homes run R-panel. Over solid decking with quality underlayment it is a durable residential system at a working price.

Is upgrading from builder-grade shingles worth it in Allen?

Usually at the first replacement or claim: Class 4 impact-rated systems earn many Texas carriers' premium discounts, and newer communities' HOA standards generally approve them easily. The math works hardest on homes facing decades of DFW hail.

How often does hail hit Allen?

NOAA's Storm Events Database lists 27 days since 2006 with hail one inch or larger reported within 6 miles of Allen, including 12 days with golf ball size stones or bigger. Hail that size was reported in 13 of the last 20 years. The most recent report was 1-inch hail on March 29, 2025.

How old are most homes in Allen?

The median home in Allen was built in 2003, according to the U.S. Census Bureau's American Community Survey. 7% of the city's housing units predate 1980 and 27% were built in 2010 or later. Many homes here are reaching the age when original roofs come due.

R-Panel / PBR Metal Roofing across DFW · All roofing services in Allen

Get a free estimate in Allen.

No pressure, no door knockers. We look at the roof, tell you what it needs (and what it doesn't), and put the number in writing.

5-Year Written Workmanship Warranty Family-owned & operated Recommended by DFW homeowners

Payment plans available. The amount never changes, only the timing.

Need r-panel / pbr metal roofing in Allen?

Call (469) 405-7870 Free Estimate