Skip to content
Free Inspection Documented findings with photos, in writing, before storm season rather than after. Documented findings, in writing. Book yours →
FAMILY-OWNED IN DFW · 5-YEAR WRITTEN WORKMANSHIP WARRANTY, TRANSFERABLE5-YEAR WRITTEN WARRANTY
[ R-PANEL / PBR METAL ROOFING · DENTON ]DFW METROPLEX · TX

Denton, TX

R-Panel / PBR Metal Roofing in Denton

Recommended by DFW homeownersRead their words →
Service infoDFW · est. 2023
  • (469) 405-7870
  • Serving the entire DFW metroplex. We come to you
  • Mon–Sat · 7:30 AM – 6:30 PM
  • 5-Year Written Workmanship Warranty, transferable
  • Family-owned & operated · residential + commercial
Direct answer

R-panel, the PBR profile, is the Texas workhorse: the exposed-fastener metal system on barns, shops, and a growing number of Denton homes that want metal durability at a working price.

R-panel, also sold as PBR, uses a ribbed profile that spans well, sheds water fast, installs efficiently, and costs meaningfully less than standing seam. The design trade matches every exposed-fastener system: screws through the panel face need periodic checks. For budget-conscious metal conversions in Denton, R-panel is frequently the right answer, and we say so even when fancier systems would quote higher.

You get a free written estimate and an inspection with photo documentation. Deductibles stay the homeowner’s responsibility under Texas law, so we never waive them, and we do not act as a public adjuster.

Is R-panel the right fit for your Denton home?

Value is why R-panel comes up so often in Denton. With 27 percent of the city’s housing built before 1980 and a median build year of 1997, many owners are replacing roofs that have already done their time, and a ribbed steel panel gives them metal’s hail resistance without paying for concealed fasteners.

That resistance gets used. Hail of an inch or more has hit within 9 miles of Denton on 46 days since 2006, including 19 days with golf-ball-size stones or larger. R-panel may take cosmetic dents while the seal holds, and routine fastener checks keep it that way for the long run. We install R-panel across Denton County, and the same crews cover Krum and Argyle.

THE SYSTEM

R-Panel / PBR Metal Roofing, up close.

A charcoal-gray standing seam metal roof on a single-story red-brick North Texas ranch home. True architectural standing seam — NOT corrugated or ribbed agricultural panel: wide, completely FLAT sixteen-inch pans between seams, with only one slim vertical seam rib every sixteen inches, so a whole roof plane shows maybe fifteen to twenty widely-spaced ribs total. Panels run unbroken from eave to ridge, no exposed fasteners anywhere in the field, a clean matching ridge cap along the peak, crisp drip edge at the eave, one plumbing vent with a color-matched boot. Morning light rakes across so each slim rib casts one long thin shadow across the flat pan beside it. Mature live oak partially shading one side, tidy lawn, clear sky.
Standing seam metal. Wide flat pans, concealed fasteners: the profile that shrugs off hail seasons.
PUBLIC RECORD

The local record behind R-Panel / PBR Metal Roofing in Denton

How a roof system holds up in Denton depends on the storms it has to take and the houses it sits on. Here is what the public record shows.

46
Hail days, 1 in.+ since 2006
19
Golf-ball-size hail days
4.25 in.
Largest stone on record
1997
Median year homes built

Hail near Denton

Hail is a regular event around Denton. NOAA's Storm Events Database lists 46 separate days since 2006 with hail one inch or larger reported within 9 miles of the city, and on 19 of those days the stones reached golf ball size or bigger. Hail that size was reported in 19 of the last 20 years. The largest stones on record nearby measured 4.25 inches (grapefruit size) on March 26, 2017. The most recent report: 1.25-inch hail on September 21, 2025.

How old Denton homes are

The median home in Denton was built in 1997. A large share of the city's 60,531 housing units are now old enough that original roofs are coming due, while 25% were built in 2010 or later.

Sources: NOAA National Centers for Environmental Information, Storm Events Database (hail reports since 2006 within 9 miles of Denton); U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates. Data pulled September 2026.

Common questions about r-panel / pbr metal roofing in Denton

What is the difference between R-panel and standing seam in Denton?

Price and fasteners. R-panel screws through the face and costs meaningfully less; standing seam conceals fasteners and costs more. Both are legitimate, so the choice is budget versus maintenance profile.

Is R-panel just for barns?

No. Barndominiums, shops, and plenty of Denton homes run R-panel. Over solid decking with quality underlayment it is a durable residential system at a working price.

Do you install this on shops and outbuildings near Denton?

Yes. Barns, workshops, and outbuildings are first-class projects out here, not afterthoughts, and the material conversation (usually metal-forward) covers them alongside the house.

How often does hail hit Denton?

NOAA's Storm Events Database lists 46 days since 2006 with hail one inch or larger reported within 9 miles of Denton, including 19 days with golf ball size stones or bigger. Hail that size was reported in 19 of the last 20 years. The most recent report was 1.25-inch hail on September 21, 2025.

How old are most homes in Denton?

The median home in Denton was built in 1997, according to the U.S. Census Bureau's American Community Survey. 27% of the city's housing units predate 1980 and 25% were built in 2010 or later. Many homes here are reaching the age when original roofs come due.

R-Panel / PBR Metal Roofing across DFW · All roofing services in Denton

Get a free estimate in Denton.

No pressure, no door knockers. We look at the roof, tell you what it needs (and what it doesn't), and put the number in writing.

5-Year Written Workmanship Warranty Family-owned & operated Recommended by DFW homeowners

Payment plans available. The amount never changes, only the timing.

Need r-panel / pbr metal roofing in Denton?

Call (469) 405-7870 Free Estimate